Black Friday. Now. Free Installation. All Desks. 

Easy Business Ordering. Clear Pricing. Pay by Card or PO.

Researching Desks? See Competitor Comparisons

Airport Operations Center Workstation Planning Guide

Airport Operations Center Workstation Planning Guide

TL;DR: Recent flight disruptions show how airport operations depend on many teams and technical systems working together. A well-planned airport operations center workstation can help operators organize screens, communications, and equipment around their jobs. It cannot prevent a network outage or replace air traffic control systems.

This guide covers how to plan workstations for Airport Operations Centers (AOCs), Ramp Towers, Security Operations Centers (SOCs), Emergency Operations Centers (EOCs), and other airport operations spaces.

Recent disruptions put airport coordination in focus

On November 13, 2026, the FAA issued a nationwide ground stop after telecommunications issues affected the stability of air traffic control communications and radar systems. The Department of Transportation reported that more than 3,500 flights were grounded. On November 16, United reported a separate technology issue that delayed some departing flights; flights already in the air and United Express flights were not affected. These were distinct disruptions involving different systems.

For airport teams, the events are a reminder of how much coordination happens across an airport. AOC staff may track airport conditions, facility status, and operational priorities. Ramp operations teams coordinate activity on the apron. Security and emergency teams monitor incidents and communicate with internal and outside responders. Air traffic controllers rely on specialized systems for their work.

An airport operations center workstation is part of the physical environment where people manage information and equipment. Its job is to support the operator’s position: provide practical screen placement, space for input devices and communications equipment, and access to the tools used during a shift.

Key takeaway: Workstation planning supports the people doing the work. It does not replace resilient networks, operational procedures, or air traffic control systems.

This distinction matters when specifying furniture for a high-stakes environment. A desk does not provide aircraft surveillance, dispatch software, radio communications, or systems redundancy. Those requirements belong to the facility’s technical and operational teams. The workstation should be planned with those systems in mind, so it fits the actual operator tasks and equipment.

Start with the work performed at each airport position

An AOC, ramp tower, SOC, and EOC may all operate in the same airport environment, but their workstations may need different layouts. Start by documenting what each role needs to see, reach, and communicate with during a normal shift and during a high-activity event.

For each position, identify:

  • The operator’s primary responsibilities

  • The applications and information that must stay visible

  • The number, size, and weight of the monitors

  • Keyboards, radios, headsets, phones, and other input devices

  • Computers, power connections, network cables, and accessories

  • Whether the station is assigned to one person or shared across shifts

  • Which equipment must be accessible for service or replacement

For example, an AOC position may need a clear view of airport status tools, operational updates, and team communications. A Ramp Tower position may prioritize the visual information and communications used to coordinate ramp activity. A SOC or EOC may place more emphasis on incident monitoring, dispatch coordination, and communications across teams.

These are planning examples, not fixed configurations. Roles vary by airport, department, staffing model, and systems in use. Map the tasks and equipment for each position before choosing a desk size or monitor count.

Common mistake: Choosing a workstation by asking only how many monitors it can hold. The better question is which information each operator needs in their primary viewing area.

A station with more screens is not automatically easier to use. Too many displays can spread important information across a wider area, leaving less room for keyboards, controllers, phones, and other equipment. Plan the screen arrangement around the operator’s most frequent tasks and keep critical information within a comfortable viewing area.

Plan screens, surfaces, and equipment as one setup

The workstation, monitors, monitor arms, input devices, computer equipment, and cabling all affect how an operator position works. Plan them together rather than selecting a desk based on its surface dimensions alone.

A dual-surface workstation provides separate monitor and keyboard surfaces. This lets operators position screens and input devices independently, which can be useful when the display arrangement and typing position need different heights. Height adjustment can also give users flexibility to alternate between sitting and standing where appropriate for their duties.

Biomorph’s Level 3 Plus is one example of a configurable dual-surface workstation. Its published product details list independently adjustable surfaces, two height presets per surface, a 22.1–48.6-inch adjustment range, and support for up to eight monitors on the 95-inch model. The right configuration depends on the actual display dimensions, mounting hardware, load, accessories, and available room. Confirm those details for the specific workstation before specifying a multi-monitor installation.

Plan for more than the screens:

  • Leave room for keyboards, pointing devices, radio equipment, and headsets.

  • Check monitor-arm reach and mounting requirements.

  • Confirm where computers and accessories will sit.

  • Include power, network, and cable paths in the room plan.

  • Make sure cables have enough clearance through the workstation’s full adjustment range.

  • Preserve access for cleaning, service, and equipment replacement.

Reality check: A desk and monitor arms are only part of an operations position. The facility’s technical team should validate the communications, network, power, security, and mission-system requirements.

Verify shift patterns, duty cycle, and project requirements

In an operations center, one workstation may serve different people across a shift schedule. A shared station should allow users to adjust screen and input positions to suit their needs. If operators use saved height presets, determine how many people share the station and whether the available presets fit the handoff process.

For a station intended for around-the-clock operations, confirm the selected equipment’s duty-cycle and warranty terms in writing before procurement. Biomorph’s published warranty information defines normal use as a five-day, 40-hour work week. The warranty and intended-use terms should be reviewed for any workstation assigned to continuous or extended shift use.

Before placing an order, bring the workstation, facility, and technical requirements together:

  1. Document each operator role and its daily tasks.

  2. List all displays, devices, computers, and accessories.

  3. Measure the room, circulation paths, and equipment clearances.

  4. Review power, network, cable-management, and maintenance needs with the appropriate technical staff.

  5. Confirm the selected desk configuration, installation scope, duty-cycle suitability, and warranty terms.

For multi-position projects, a floor plan and equipment list can help the planning conversation move beyond a generic desk selection. Biomorph offers workstation specification and space-planning support for control and command-center projects. Share the room dimensions, number of positions, monitor specifications, and equipment list to help determine which configurations are worth reviewing.

Summary: what to review before specifying an airport workstation

  • Define the operator tasks for each AOC, Ramp Tower, SOC, or EOC position.

  • Prioritize the information that must stay in the operator’s main viewing area.

  • Plan monitors, input devices, computers, power, and cabling together.

  • Consider independent monitor and keyboard positioning for shared workstations.

  • Confirm duty-cycle and warranty coverage for continuous-use environments.

  • Coordinate furniture choices with facility, IT, communications, and procurement teams.

Plan an airport operations workstation with Biomorph. Review Biomorph’s command-center workstation options and space-planning information, or explore the Level 3 Plus workstation.

Note: Images shown are renderings.

Sources and product references